Rb25det Greddy Intake Manifold Installation
I have a bunch of pics i took while doing this so i thought i would post them up. Hopefully it will help some ppl who decide to get one of these Before you go ahead with this mod know that cold side intercooler piping to your throttle body has to be modified whether you can do this yourself or not i obviously dont know so i cant assist in that part of the install, all i can show you is what i did there. Tools you will need to do this: Screw drivers (flat and phillips head). Auto loot hack rf indonesia. Socket and ratchet set (minimum 8mm, 10mm, 12mm, 13mm, 14mm sockets and a ratchet). Side cutters.
Pointy nose and standard pliers. A hose cutter makes cutting the vac, coolant and fuel lines easier. Ultra blue liquid gasket. Vasoline or rubber grease.
Greddy Intake Manifold Sr20
A decent spanner set. Soldering iron. Kumpulan ringtone nokia 3315 mp3. This is probably minimum but the more tools the merrier. Extra parts besides plenum: Nissan part number 23785-57Y00 (aac gasket) 1/2 vacume hose Bag of cable ties 3/8 EFI hose 1m 1/4 vacume hose 3m 3/4 oil/coolent hose 1m Various clamps to suit if you dont want to reuse your old ones i would get a pack of different size hose clamps as rb25s are getting old and i think the clamps they use are S*** anyway. 3/4 (19mm) hose 1m A weld on 19mm hose fitting (i used a -10 alloy weld on fitting and a -10 3/4 pushlock fitting but you dont have to) Masking tape. Small amount of electrical wire The main reason i bought this plenum is because it has front facing throttle body so i could shorten my cooler piping.